8-36 Set ETH Function
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
Port Type: S-Trunk
Figure 8-43 VLAN Setting Option Window — S-Trunk
Tick the check boxes of the VLANs that are to configure the port type: S-Trunk.
At the ports selected here,
– Tagged frames with S-VLAN ID that are checked in the list are forwarded.
– For untagged frames, S-VLAN of the selected VLAN in the Untag Frame
Assignment column will be assigned, then be forwarded.
– Other types of frames are discarded.
Table 8-8 VLAN Setting Parameters — S-Trunk
Parameter Value Description
Port/VLAN Configuration (read only) Indicates the information of selected port.
VLAN Assignment
VLAN Mode 802.1ad Indicates the VLAN Mode of the selected port.
Port Type S-Trunk Allows selected tagged frames and untagged frames to pass
through. For an untagged frame, the specified S-VLAN ID is
applied.
X VLAN Assignment Clear (button) Clicking here removes ticks from all check boxes.
Enable (check box) Tick the check box to select a VLAN to assign the selected
port type configuration.
C-Tag Frame Assignment
(C-Access Port)
(radio button) Clicking the radio button selects a VLAN ID to the untagged
frame.
C-VLAN ID ——— ———
To Next Page
