NEC iPASOLINK EX Advanced - Page 403

8-84 Set ETH Function
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
4. Specify the parameters:
Figure 8-118 Link OAM Setting Option Window
Table 8-21 Link OAM Setting Parameter
Parameter Value Description
Local DTE Information
Item (read only) Indicates the information of the selected object.
Port (read only)
Port Name (read only)
Link OAM Enable Enable/Disable the use of Link OAM function.
Disable
Link OAM Mode Active Uses active Link OAM (indicates the discovery process).
Passive Uses passive Link OAM (does not initiates discovery process).
Dying Gasp Enable Enable/Disable to issue Dying Gasp notification.
Disable
Critical Event Enable Enable/Disable to issue Critical Event notification.
Disable