NEC iPASOLINK EX Advanced - Page 536

Set Equipment Clock and Synchronization 9-9
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
8. Information dialog box appears. Click the OK button of the dialog box to
proceed.
Figure 9-10 Information Dialog Box
9. The PTP Mode Setting window updates the PTP Parameters information.Verify
the displayed information.
Figure 9-11 PTP Mode Setting Window
CAUTION: In order to apply the values properly, CPU must be
rebooted when parameter(s) is/are changed.
This step ends the procedure.