Issue 1.2 UNIVERGE SV9100
3 - 68 Installing the SV9100 Chassis
2. Remove two screws from front of Battery Tray Suppressor (Refer to
Figure 3-94 Removing Battery Tray Suppressor).
3. Slide Battery Tray Suppressor outward to remove.
4. Disconnect the Battery Connection Cables from the Fuse Unit.
5. Loosen two screws and pull Fuse Unit out of the CHS LARGE BATT
BOX.
6. Refer to Figure 3-96 CHSG LARGE BATT BOX Fuse Unit on page
3-69 for replacement of 8A or 30A fuses.
Figure 3-94 Removing Battery Tray Suppressor
Figure 3-95 Disconnecting Battery Cables
To Next Page
Loading...
