UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 89
7. Carefully push the Serial cable into the Serial Cable
Groove (DT700/DT800 only).
8. Using the guides, slide the DCL-60-1 onto the
installed bracket (refer to Figure 5-91 Press Serial
Cable into Groove).
9. Secure the DCL-60-1/DCZ-60-2 CONSOLE to the
bracket with the two screws provided.
Figure 5-91 Press Serial Cable into Groove
Figure 5-92 Securing the DCL-60-1/DCZ-60-2
CONSOLE with Screws
To Next Page
Loading...
