Issue 1.2 UNIVERGE SV9100
5 - 110 Installing DT Series Digital and IP Multiline Terminals
7. Remove the side panel.
8. Disconnect serial connection cord from terminal body. Leave
cord connected to the cradle unit.
9. Push the latch to the right to unlock the cradle unit. Then push
the cradle unit forward to separate it from the terminal body
(see Figure 5-122 Detach Cradle from Multiline Terminal).
Figure 5-121 Remove Legs From Multiline Terminal
Figure 5-122 Detach Cradle from Multiline Terminal
To Next Page
Loading...
