Issue 1.2 UNIVERGE SV9100
6 - 46 Installing SV9100 Optional Equipment
8. Push latch to right to unlock the cradle unit. Then push the
cradle unit forward to separate from the terminal body.
9. Fit the projections on the side of the PSA-L UNIT into the guide
holes on the side of the terminal and pull toward you until the
PSA-L UNIT snaps into place.
Figure 6-38 Bottom of Multiline Terminal (Legs Removed)
Figure 6-39 Attach PSA-L Unit to the Multiline Terminal
To Next Page
Loading...
