Program 12 to 15
Xen Topaz Programming Manual 74
Feature Cross Reference
Refer to feature in above chart.
Telephone Programming Instructions
To enter data for Program 14-01(Basic Trunk Data Setup):
1. Enter the programming mode.
2. Enter 14 01
3. Enter the number of the item you want to program.
4. Select the Trunk port number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
14-01-01 Trunk1
TRK Name-Line 00
14-01-xx Trunkxx
xxxxx
To Next Page
Loading...
