NSK Megatorque PS Series - Page 303

— 9-79 —
ÌÌ XPA: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XPD: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XPN: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XPR: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XPS: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XRC: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XRI: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XRK: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XRO: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XRR: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XRT: (Factory use only)
 This parameter is for factory use only. Do not change the setting,