NSK Megatorque PS Series - Page 302

— 9-78 —
ÌÌ XII: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XIL: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XIP: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XIR: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XIS: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XLF: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XMF: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XMM: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XMT: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XOL: (Factory use only)
 This parameter is for factory use only. Do not change the setting,
ÌÌ XOP] (Factory use only)
 This parameter is for factory use only. Do not change the setting,