NSK Megatorque PS Series - Page 308

— 9-84 —
Ì P ZF: (Factory use only)
！
Caution :This parameter is properly set at the factory. Never change the setting.
Category Parameter
Format
ZF data
Data range 0 to 5
Shipping set 1
Ì P ZP: (Factory use only)
！
Caution : This parameter is factory use only. This is for the automatic tuning
function and is properly set at the factory. Never change the setting.
Category Parameter
Format
ZP data
Data range 0.5 to 1.80
Shipping set 1.00