NSK Megatorque PS Series - Page 84

— 5-12 —
6) Enter the ENT key to complete the tuning and the changed parameter data will be
displayed.
(An input of the BS
key reset to the setting before the tuning.)
:>
S
G/AJ
STEP 1
SG 13
PG0.26;_
ENT
Each setting is indicated with the prompt “; (colon)”, and the screen pauses the
indication at this stage.
7) Input the SP key.
(An input of the BS key will abort the readout.)
S
G13
PG0.26;
VG2.81;
:>_
SP SP