Ordering and Shipping Information
MC9S12G Family Reference Manual Rev.1.27
NXP Semiconductors 1253
Appendix C
Ordering and Shipping Information
Revision History
C.1 Ordering Information
The following figure provides an ordering part number example for the devices covered by this data book.
There are two options when ordering a device. Customers must choose between ordering either the
mask-specific part number or the generic / mask-independent part number. Ordering the mask-specific part
number enables the customer to specify which particular mask set they will receive whereas ordering the
generic mask set means that FSL will ship the currently preferred mask set (which may change over time).
In either case, the marking on the device will always show the generic / mask-independent part number
and the mask set number.
NOTE
The mask identifier suffix and the Tape & Reel suffix are always both omitted from the
part number which is actually marked on the device.
For specific part numbers to order, please contact your local sales office. The below figure illustrates the
structure of a typical mask-specific ordering number for the MC9S12G devices
Version
Number
Revision
Date
Description of Changes
Rev 0.01 2-Jan-2009 Initial release
Rev 0.02 22-Nov-2012 Added temperature option W
Rev 0.03 25-Jan-2013 • Updated C.1, “Ordering Information” (added KGD option)
• Added C.2, “KGD Shipping Information”
Rev 0.04 1-Feb-2013 • Removed C.2, “KGD Shipping Information”
To Next Page
Loading...
Need help?
General
