Analog-to-Digital Converter (ADC12B16CV2)
MC9S12G Family Reference Manual Rev.1.27
558 NXP Semiconductors
16.5 Resets
At reset the ADC12B16C is in a power down state. The reset state of each individual bit is listed within
the Register Description section (see Section 16.3.2, “Register Descriptions”) which details the registers
and their bit-field.
16.6 Interrupts
The interrupts requested by the ADC12B16C are listed in Table 16-24. Refer to MCU specification for
related vector address and priority.
See Section 16.3.2, “Register Descriptions” for further details.
Table 16-24. ATD Interrupt Vectors
Interrupt Source
CCR
Mask
Local Enable
Sequence Complete Interrupt I bit ASCIE in ATDCTL2
Compare Interrupt I bit ACMPIE in ATDCTL2
To Next Page
Loading...
