Tungsten™ E2 Handheld 533
CHAPTER 25 Customizing Your Handheld
2
Enter the basic settings:
Name Enter a name for your connection settings. This name will appear on
the Connection Preferences screen so that you can select your connection later.
Connect to Select the type of device you want to connect to: PC, Modem, or
Local Area Network.
Via Select the method you want to use to connect to the device you selected:
Bluetooth—the Bluetooth
®
radio on your handheld; Cradle/Cable—the USB
sync cable that came with your handheld; Infrared—the IR port on your
handheld.
The Dialing and Volume settings appear only if you select Modem as
the Connect to setting.
Dialing Select whether your modem uses TouchTone or Rotary dialing.
Volume Select the volume level for your modem’s speaker: Off, Low, Medium,
or High.
Continued
Tip
You can also customize
Bluetooth connection
settings.
NOTE
To Next Page
Loading...
