18-3
(3) Count the number of production by counting the number of execution of the processing program and
assigned to
avariable.
Preconditions:
Variable the production count is to be assigned to: GI001,
Processing program: WORK01.prg
Production count program：Prog0001.prg
１
CALL WORK01.prg Execute the processing program.
２
INC GI001 Add “1” to GI001.
Counter reset program：Prog0002.prg
◎ To reset the value of the variable, execute a program (Counter reset program) to assign “0” to the variable.
１
SET GI001 = 0 Assign “0” to GI001.
・You can use the counter reset program every morning if you want to count the production of a day, or use it at the
beginning of each month if you want to count the production of a month.
To see the value of the variable:
Click
>>
>>
View
>>
Display
change
>>
Display
variable
To Next Page