ii
■ Introduction
Thank you for purchasing our Panasonic industrial robot G2/GX controller series. This manual explains basic operation
and advanced operation (details of parameters settings and sequene commands) of G2/GX controller series.
Operation procedures explained in this document is based on the software version J* .
When you upgrade your software, check our sales office of service engineer if the current manual you have is applicable
to the upgraded software version.
<Note>
Higher version of software doesn’t necessarily require revision of manual unless changes of software cause change in
operation procedures.
Click the
Version
icon on the
Help
Help menu to check the software version.
■ Safety
First of all, please read and understand separately provided “Safety Manual” thoroughly for proper and safe operation of
our robots.
Prior to operation, read this manual for proper operation. Keep this manual in an easily accessible place and re-read as
necessary.
The contents of manuals are subject to change without further notice.
To Next Page
Loading...
