Philips Expression MR400 - Page 54

1‐32ImportantInformationExpressionMR400InstructionsforUse
5Whenyoureachthedesiredsymbol,pressandholdthebuttonfor
approximately5secondstolockand savethenewsetting.
Theselectednetworkchannel'ssymbolwillturnoffwhilethe
buttonisdepressed.Thenitwillilluminate(notblink)when
the
newnetworkchannelsettingissaved.Onceilluminated,release
thebutton.Themodulewillbeginusingtheselectednetwork
channel.
Note
Any part the network channel change sequence not completed will
cause the module to revert to the network channel previously set 30
seconds after the network selection button was last released.
Step Action