4535 612 10261 HD11 Service Manual Page 186
CSIP Level 1 Troubleshooting: Backing Up and Restoring
8. When the restoration is complete, click Restore.
All presets on the backup CD should appear in the Restore Settings window.
9. Click Select All.
10. Click Start.
11. When the restoration is complete, click Close.
12. Remove the CD.
Restoring the Network Settings
➤ To restore the network settings
1. With the ultrasound application running, press the Setup key.
The Setup window opens (Figure 5-1).
2. Click the This System tab.
3. Click the Dicom button.
4. Click the This System tab.
5. Click Network Settings.
6. Enter the settings you recorded in “Recording the Network Settings” on page 183.
To Next Page
Loading...