Promise Technology VTRAK E610f User Manual

Chapter 4: Management with WebPAM PROe
93
Managing Storage Services
Storage services deal with initiators and LUN mapping for Fibre Channel models
and for Serial Attached SCSI models. LUN masking is the process of applying a
LUN Map so that each initiator can only access the LUNs specified for it.
Features include:
• Adding an Initiator (page 93)
• Deleting an Initiator (page 94)
• Viewing the LUN Map (page 94)
• Enabling LUN Masking (page 94)
• Adding a LUN Map (page 94)
• Editing a LUN Map (page 95)
Adding an Initiator
You must add an initiator to the VTrak's initiator list in order to use the initiator to
create a LUN map.
To add an initiator:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Storage Services icon.
4. Click the Initiators tab in Management View.
5. From the Initiators tab dropdown menu, choose Add Initiator.
6. Enter the initiator's name in the Initiator Name field.
• Fibre Channel – A Fibre Channel initiator name is the World Wide Port
Name of the device and is composed of a series of eight, two-digit
hexadecimal numbers.
• SAS – A SAS initiator name is the SAS address of the HBA card in the
Host PC. Obtain the initiator name from the initiator utility on your host
system.
Obtain the initiator name from the initiator utility on your host system.
Note that the initiator name you input must match exactly in order for the
connection to work.
7. Click the Submit button.
You can also add initiators from the Fibre Channel or SAS Initiators tab. See
“Viewing Fibre Channel Initiators” on page 88 and “Viewing SAS Initiators” on
page 91.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English