53
Chapter 4: Management with WebPAM PROe
This chapter covers the following topics:
• Logging into WebPAM PROe (page 54)
• Choosing a Language (page 56)
• Perusing the Interface (page 57)
• Logging out of WebPAM PROe (page 61)
• Working with the Storage Network (page 62)
• Working with Subsystems (page 63)
• Managing Users (page 76)
• Managing the Network Connection (page 82)
• Managing Fibre Channel Connections (page 84)
• Managing SAS Connections (page 90)
• Managing Storage Services (page 93)
• Monitoring Performance (page 96)
• Managing Software Services (page 98)
• Exporting the User Database (page 108)
• Exporting a Configuration Script (page 109)
• Importing a User Database (page 110)
• Importing a Configuration Script (page 111)
• Updating the Firmware (page 112)
• Viewing Flash Image Information (page 113)
• Restoring Factory Defaults (page 114)
• Clearing Statistics (page 115)
• Saving a System Service Report (page 116)
• Shutting Down the Subsystem (page 117)
• Starting Up After Shutdown (page 118)
• Restarting the Subsystem (page 119)
• Managing Controllers (page 120)
• Managing Enclosures (page 125)
• Managing Physical Drives (page 131)
• Managing UPS Units (page 136)
• Managing Disk Arrays (page 139)
• Managing Logical Drives (page 152)
• Managing Spare Drives (page 159)
• Working with the Logical Drive Summary (page 163)
For information about VTrak’s audible alarm and LEDs, see “Chapter 8:
Troubleshooting” on page 307.
To Next Page
Loading...
Need help?
General
