VTrak E-Class Product Manual
376
The Performance tab reports the state and cumulative counts for a specific
path.
Move the scroll bar or expand the window to see all of the reported statistics.
The Performance tab reports the following data for each path:
An Active state indicates this path is available to handle I/O requests.
If Active does not appear, the path is designated as Standby.
Active and Standby states are determined by Load Balance Policy.
See also:
• “Viewing Path Performance Statistics” on page 375
• “Load Balance Policy” on page 378
Clearing Path Statistics
You can Clear Path Statistics for all paths as needed for monitoring and
diagnostic purposes.
To clear the statistics for ALL paths, do one of the following actions:
• From the Operations menu, choose Clear Path Statistics.
• In the Tree, right-click on the LUN icon, and choose Clear Path Statistics
from the popup menu.
• Path ID
• State (Active or not)
• Read Requests
• Write Requests
• Bytes Read
• Bytes Written
• Non-IO Requests
• Queue Depth
• Retries Count
• Failure Count
To Next Page
Loading...
Need help?
General
