Promise Technology VTRAK E610f User Manual

Chapter 4: Management with WebPAM PROe
103
4. Enter information or change settings as required.
• Enter the SNMP Port number. 161 is the default.
• Enter a System Name. There is no default name.
• Enter a System Location. USA is the default.
• Enter a System Contact. The email address of the administrator or other
individual.
• Enter the Read Community. Public is the default.
The Write Community is set to Private, no options.
To add a Trap Sink, see “Adding Trap Sinks” below.
5. Click the Submit button.
6. Click OK in the confirmation box to restart the SNMP service with your
changes.
Changing the Startup Setting
1. Under Startup Type:
• Click the Automatic option to start the service automatically during
system startup. Recommended.
• Click the Manual option to start the service manually (the service does
not start during system startup).
2. Click the Submit button.
Stopping SNMP service
To stop the SNMP service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting SNMP service
To start or restart the SNMP service, click the Start or Restart button.
Managing SNMP Trap Sinks
Adding Trap Sinks
To add a SNMP trap sink:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the SNMP link on the Service tab.
4. Enter a Trap Sink IP address.
5. Choose a Trap Filter.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English