Promise Technology VTRAK E610f User Manual

Chapter 4: Management with WebPAM PROe
131
Managing Physical Drives
Managing Physical Drives deals with the physical disk drives installed in the
VTrak subsystem enclosure, including the following functions:
• Viewing a List of Physical Drives (page 131)
• Identifying a Physical Drive (page 131)
• Making Global Physical Drive Settings (page 132)
• Viewing Physical Drive Information (page 133)
• Viewing Physical Drive Statistics (page 133)
• Making Physical Drive Settings (page 134)
• Clearing Stale and PFA Conditions (page 134)
• Forcing a Physical Drive Offline or Online (page 135)
Viewing a List of Physical Drives
To view a list of physical drives in this enclosure:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
4. Click the Physical Drives icon.
The list of physical drives appears in Management View.
Identifying a Physical Drive
To identify physical drive in the VTrak subsystem enclosure:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
4. Click the Physical Drives icon.
5. In Management View:
• Click the physical drive in the Enclosure Front View Diagram.
The physical drive’s drive carrier Disk Status LED flashes for one
minute. See page 132, Figure 10.
• Click the PD link under Device to highlight the drive’s location in the
Enclosure Front View Diagram.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English