Promise Technology VTRAK E610f - Logging out of the CLI; Logging Back into the Cli and Clu

VTrak E-Class Product Manual
170
Logging Out of the CLI
When you shut down or restart the VTrak subsystem, you are automatically
logged out of the CLI.
To manually log out of the CLI (no shut down or restart):
At the username@cli> prompt, type logout and press Enter.
The prompt changes to cli>.
Logging Back Into the CLI and CLU
To log into the CLI and CLU after a manual logout:
1. At the cli:> prompt, type login followed by your user name and press Enter.
2. At the Password: prompt, type your password and press Enter.
3. At the username@cli> prompt, type menu and press Enter to open the CLU.