Chapter 4: Management with WebPAM PROe
113
Viewing Flash Image Information
Flash image information refers to the package of firmware components running
on your VTrak controller or controllers.
To view flash image information:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Software Management icon.
4. Click the Image Version tab.
The flash image information displays on the screen.
• Enclosure Number – 1 (one) is the Head Unit. Other numbers are
cascaded or expanded subsystems
• Image Condition – Running is the firmware currently running on the
controllers. Flashed is the firmware flashed to memory
• Image Type – A specific component
• Controller ID – 1 or 2
• Version number
•Build date
• Flash (installation) date
If the Running and Flashed Images do not match, the VTrak has not
restarted since the firmware was last updated. Restart the VTrak to run the
Flashed firmware package. See “Restarting the Subsystem” on page 119.
Note that all of these components are upgraded together in a package. See
“Updating the Firmware in WebPAM PROe” on page 249.
To Next Page
Loading...
Need help?
General
