VTrak E-Class Product Manual
238
Viewing Flash Image Information
Flash image information refers to the package of firmware components running
on your VTrak controller or controllers.
To view flash image information:
1. From the Main Menu, highlight Additional Info and Management, and press
Enter.
2. Highlight Flash Image Version Info and press Enter.
The flash image information displays on the screen:
• Enclosure Number – 1 (one) is the Head Unit. Other numbers are
cascaded or expanded subsystems
• Running Image Info – Firmware currently running on the controllers
• Flashed Image Info – Firmware flashed to memory
• Image Type – A specific component
• Controller ID – 1 or 2
• Version number
•Build date
• Flash (installation) date
If the Running and Flashed Images do not match, the VTrak has not
restarted since the firmware was last updated. Restart the VTrak to run the
Flashed firmware package. See “Restarting the Subsystem” on page 245.
Note that all of these components are upgraded together in a package. See
“Updating the Firmware in the CLU” on page 254.
To Next Page
Loading...
Need help?
General
