Promise Technology VTRAK E610f User Manual

Chapter 4: Management with WebPAM PROe
125
Managing Enclosures
On VTrak E-Class, enclosures include the main VTrak subsystem or Head Unit
as well as additional enclosures that are connected to it through cascading or
expansion. Enclosure Management includes the following functions:
• Viewing the Enclosures Summary (page 125)
• Locating an Enclosure (page 125)
• Viewing Enclosure Topology (page 126)
• Viewing Enclosure Information (page 126)
• Making Enclosure Settings (page 127)
• Viewing FRU VPD Information (page 127)
• Checking the Batteries (page 128)
• Reconditioning a Battery (page 128)
• Silencing the Buzzer (page 129)
• Making Buzzer Settings (page 129)
• Testing the Buzzer (page 130)
Viewing the Enclosures Summary
To view information about the enclosures:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
The following information is shown:
• Enclosure ID number
• Enclosure Type
• Operational Status
• Status Description (specific components in need of attention, if any)
Locating an Enclosure
To locate an enclosure (subsystem):
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Locate Enclosure button for the enclosure you want.
The FRU Status and Disk Status LEDs on the front of the enclosure flash for
one minute. See page 126, Figure 9.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English