VTrak E-Class Product Manual
52
Logging out of WebPAM PROe
There are two ways to log out of WebPAM PROe:
• Close your browser window
• Click Logout on the WebPAM PROe banner
Figure 5. Clicking “Logout” on the WebPAM PROe banner
Clicking Logout brings you back to the Login Screen. See page 47.
After logging out, you must enter your user name and password in order to log in
again.
Using WebPAM PROe over the Internet
The above instructions cover connections between VTrak and your company
network. It is also possible to connect to a VTrak from the Internet.
Your MIS Administrator can tell you how to access your network from outside the
firewall. Once you are logged onto the network, you can access the VTrak using
its IP address.
Note
This function does not automatically create a hot spare drive. After
the disk array is created, you can create a hot spare drive for it.
See “Creating a Spare Drive” on page 160 or page 201.
To Next Page
Loading...
Need help?
General
