Promise Technology VTRAK E610f User Manual

Chapter 5: Management with the CLU
229
Working with Software Management
Software Management includes the following functions:
• Making Email Settings (page 229)
• Making SLP Settings (page 230)
• Making Webserver Settings (page 230)
• Making Telnet Settings (page 231)
• Making SSH Settings (page 231)
• Making SNMP Settings (page 232)
• Managing SNMP Trap Sinks (page 232)
• Making CIM Settings (page 233)
• Making Netsend Settings (page 235)
• Managing Netsend Recipients (page 235)
Making Email Settings
By default, Email service is set to Automatic and its normal status is Started.
To make Email service settings:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Software Management and press Enter.
3. Highlight Email and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
5. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• SMTP server IP address or server name
• Server Port number (25 is the default)
6. Highlight Authentication and press the spacebar to toggle between Yes and
No.
If you selected Yes, type in a User name and Password in the fields
provided.
7. The following items are optional but recommended. Highlight and press the
backspace key to erase the current value, then type the new value:
• Sender’s email address
• Subject Line for the email message
8. Press Ctrl-A to save your settings.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English