Promise Technology VTRAK E610f User Manual

VTrak E-Class Product Manual
310
See page 249 for more information about field-replaceable components.
See page 336 for a discussion of critical and offline logical drives.
Drive Status Indicators
There are two LEDs on each Drive Carrier. They report the presence of power
and a disk drive, and the current condition of the drive.
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
Figure 3. VTrak drive carrier LEDs
See “Critical & Offline Disk Arrays” on page 336 for a discussion of rebuilding and
failed disk drives.
Back of Enclosure
When the FRU Status LED on VTrak’s front panel shows Amber or Red, check
the LEDs on the back of VTrak. These LEDs give the status of the field
replaceable units.
* Field Replacement Unit: includes fan, battery, and power supply unit (PSU).
** Blinks once every two seconds.
LEDs
State
Dark
Steady
Green
Flashing
Green
Amber Red
Power/
Activity
No Drive
Drive
Present
Activity — —
Status
No Power/
No Drive
Drive OK —
Drive
Rebuilding
Drive
Error
Disk Status
Power/Activity

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English