Chapter 5: Management with the CLU
247
Making Buzzer Settings
The buzzer sounds to inform you that the VTrak needs attention. See “VTrak is
Beeping” on page 307 for more information.
To change buzzer settings:
1. From the Main Menu, highlight Buzzer and press Enter.
A list of Controllers appears with the current buzzer setting and status.
2. Highlight the Controller whose buzzer you want to set and press Enter.
3. Highlight Enabled and press the spacebar to toggle between Yes and No.
4. Press Ctrl-A to save your settings.
To Next Page
Loading...
