Promise Technology VTRAK E610f User Manual

Chapter 5: Management with the CLU
167
Making a Telnet Connection
A Telnet connection requires a network connection between the Host PC and
VTrak controller’s Management (Ethernet) port.
Figure 2. Management port on the controller
To start the telnet program:
1. Go to the command line prompt (Windows) or click the terminal icon (Linux).
2. Type telnet 192.168.1.56 2300 and press Enter.
The IP address above is only an example.
Use your VTrak's Management port IP address.
The VTrak's Telnet port number is 2300.
3. Press Enter once to launch the CLI.
Making a SSH Connection
A Secure Shell (SSH) connection requires a network connection between the
Host PC and VTrak controller’s Management (Ethernet) port.
Windows PCs require you to install a SSH application.
Figure 3. Management port on the controller
Windows
To start the Windows SSH program:
1. Open the SSH application from the Start menu.
2. Enter the VTrak's IP address and SSH port number in the fields provided.
The VTrak's SSH default port number is 22.
3. Press Enter once to launch the CLI.
Mgmt
UPS
115200
8 N 1
FC 1 FC 2
4
2
1
Gb/s
4
2
1
Gb/s
Management port
Mgmt
UPS
115200
8 N 1
FC 1 FC 2
4
2
1
Gb/s
4
2
1
Gb/s
Management port

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English