Promise Technology VTRAK E610f User Manual

VTrak E-Class Product Manual
230
To start, stop or restart the Email service, highlight Start, Stop or Restart and
press Enter.
Making SLP Settings
By default, SLP service is set to Automatic and its normal status is Started.
To make SLP service settings:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Software Management and press Enter.
3. Highlight SLP and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
5. Press Ctrl-A to save your settings.
To start, stop or restart the SLP service, highlight Start, Stop, or Restart and press
Enter.
Making Webserver Settings
By default, Webserver service is set to Automatic and its normal status is Started.
To make Webserver service settings:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Software Management and press Enter.
3. Highlight Webserver and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
5. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• HTTP Port (80 is the default)
• Session Time Out (24 minutes is the default. 1440 minutes = 24 hours)
6. Highlight SSL and press the spacebar to toggle between Enabled and
Disabled.
7. Highlight HTTPS Port and press the backspace key to erase the current
value, then type the new value. 443 is the default.
8. Press Ctrl-A to save your settings.
To start, stop or restart the Webserver service, highlight Start, Stop, or Restart
and press Enter.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English