Promise Technology VTRAK E610f User Manual

Chapter 5: Management with the CLU
179
Managing the Enclosure
Enclosure Management includes the following functions:
• Viewing the Enclosures Summary (page 179)
• Viewing Enclosure Information (page 179)
• Making Enclosure Settings (page 180)
• Viewing FRU VPD Information (page 180)
• Viewing Power Supply Status (page 180)
• Locating a Power Supply (page 181)
• Viewing Cooling Unit Status (page 181)
• Viewing Temperature Sensor Status (page 181)
• Viewing Voltage Sensor Status (page 182)
• Checking the Batteries (page 182)
• Reconditioning a Battery (page 183)
• Locating an Enclosure (page 183)
• Viewing Enclosure Topology (page 183)
Viewing the Enclosures Summary
Enclosure Management includes information, status, settings and location. To
access Enclosure Management:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
The following information is shown:
• Enclosure ID number
• Enclosure Type
• Operational Status
• Status Description (specific components in need of attention, if any)
Viewing Enclosure Information
To view enclosure information:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight the enclosure you want and press Enter.
Enclosure information appears the Information tab in Management View. You
can monitor power supplies, cooling units, enclosure temperatures and
voltages, and the battery.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English