Promise Technology VTRAK E610f User Manual

VTrak E-Class Product Manual
380
4. Click the Apply button.
5. Click the OK button in the confirmation box.
The new setting takes effect immediately.
See also:
• “Load Balance Policy” on page 378.
• “PDO Removal” on page 380.
• “Refreshing the Objects” on page 382.
PDO Removal
PDO removal refers to the action of deleting a multipath input/output (MPIO) disk
from the Windows Device Manager after all paths to a physical device object
(PDO) have failed.
PDO removal interval refers to the period of time in seconds between the
moment all paths to a PDO are disconnected and the MPIO disk disappears from
the Device Manager.
Changing PDO Removal Settings
To change PDO removal settings:
1. Do one of the following actions:
• Click the Advanced Settings icon.
• From the Operations menu, choose Advanced Settings.
The Advanced Settings dialog box appears with the MPIO Parameters tab
displayed.
2. Click the arrows or type a new value in the PDO Remove Period field to
change the interval.
120 seconds is the Promise-recommended default value.
3. Click the Apply button.
4. Click the OK button in the confirmation box.
The new setting takes effect immediately.
See also “Path Verification” on page 379.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English