Promise Technology VTRAK E610f User Manual

VTrak E-Class Product Manual
68
Clearing the Runtime Event Log
To clear the runtime event log:
1. In Tree View, click the Subsystem icon.
2. In Management View, click the Events tab dropdown menu and choose
Runtime Events.
3. Click the Clear Event Log button.
4. In the Confirmation dialog box, type confirm and click the OK button.
Viewing NVRAM Events
NVRAM Events are the most recent important events stored in non-volatile
memory. To view runtime events:
1. In Tree View, click the Subsystem icon.
2. In Management View, click the Events tab dropdown menu and choose
System Events in NVRAM.
Events are displayed by:
• Item Number – A consecutive decimal number assigned to a specific
event
• Device – Battery, controller, logical drive, physical drive, port, etc.
• Event ID – The hexadecimal number that identifies the specific type of
event
• Severity – See Table 2 on page 67
• Time – Time and date of the occurrence
• Description – A brief description of the event
3. Click the link at the top of the column by which you want to sort the events.
After you click the item, a triangle icon appears.
• If the triangle points upward, the column is sorted low-to-high or old-to-
new
• If the triangle points downward, the column is sorted high-to-low or new-
to-old
Click the link a second time to change to flip the triangle and reverse the sort
sequence.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English