Promise Technology VTRAK E610f User Manual

Chapter 4: Management with WebPAM PROe
147
A new window displays with the disk array information and the proposed
logical drives with their parameters.
13. Click the Submit button create the logical drives.
The new logical drive appears in the Logical Drive List the Information tab.
If you created a fault-tolerant logical drive (any RAID level except RAID 0), the
Operational Status of new logical drive will display Synchronizing for several
minutes after creation. You can use the logical drive during this period but read/
write performance could be slower than normal.
Deleting a Logical Drive
To delete a logical drive:
1. Click the Subsystem icon in Tree View.
2. Click the Disk Arrays icon
3. Click the Disk Array icon.
4. Click the Delete LD tab in Management View.
5. Check the box to the left of the logical drive you want to delete.
6. Click the Submit button.
7. In the confirmation box, type the word confirm in the field provided and click
the OK button.
The logical drive disappears from the list on the Information tab.
Migrating a Disk Array
The action of migrating a disk array means either or both:
• Change the RAID Level
• Expand the storage capacity
For a list of Migration options and other important information, see “RAID Level
Migration” on page 294.
To Migrate an existing disk array:
1. Click the Subsystem icon in Tree View.
2. Click the Disk Arrays icon.
Caution
All data the logical drive will be lost. Back up any valuable data
before deleting the logical drive.

Promise Technology VTRAK E610f Specifications

General

Brand	Promise Technology
Model	VTRAK E610f
Category	Storage
Language	English