VTrak E-Class Product Manual
iv
Chapter 3: VTrak Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Setting up the Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Choosing DHCP or a Static IP Address . . . . . . . . . . . . . . . . . . . . .40
VTrak Default IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Virtual Management Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Physical Management Ports . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Setting up VTrak with the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Setting up VTrak with the CLU . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Setting system date and time . . . . . . . . . . . . . . . . . . . . . . . . . .43
Making Management Port settings . . . . . . . . . . . . . . . . . . . . . .44
Viewing IP address and settings . . . . . . . . . . . . . . . . . . . . . . . .44
Making Controller Maintenance Mode Settings . . . . . . . . . . . .44
Exiting the CLU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Setting Up WebPAM PROe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Logging into WebPAM PROe . . . . . . . . . . . . . . . . . . . . . . . . . .46
Choosing a Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Creating a Disk Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Logging out of WebPAM PROe . . . . . . . . . . . . . . . . . . . . . . . .52
Using WebPAM PROe over the Internet . . . . . . . . . . . . . . . . . .52
Chapter 4: Management with WebPAM PROe . . . . . . . . . . . . . . . . . .53
Logging into WebPAM PROe . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Regular Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Secure Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Choosing a Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Perusing the Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Using the Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Using Tree View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Using Management View . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Viewing the Event Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Logging out of WebPAM PROe . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Working with the Storage Network . . . . . . . . . . . . . . . . . . . . . . . . .62
Viewing Other Subsytems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Updating the List of Subsystems . . . . . . . . . . . . . . . . . . . . . . .62
Logging into a Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Hiding the Other Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . .62
Working with Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Viewing Subsystem Information . . . . . . . . . . . . . . . . . . . . . . . .64
Saving a System Service Report . . . . . . . . . . . . . . . . . . . . . . .64
Setting an Alias for the Subsystem . . . . . . . . . . . . . . . . . . . . . .64
Setting Redundancy for the Subsystem . . . . . . . . . . . . . . . . . .64