Appendix C: Multipathing on Linux
393
Note that the actual version number might be different, depending on your
configuration.
3. Type the following command and press Enter:
# rpm -qa | grep multipath-tools
If the required package is present, the system returns the following line.
SLES 10:
multipath-tools-0.4.6-25.8.rpm
SLES 10 SP1:
multipath-tools-0.4.7-34.18
SLES 10 SP2:
multipath-tools-0.4.7-34.38
SLES 10 SP3:
multipath-tools-0.4.7-34.50.10
SLES 11:
multipath-tools-0.4.8-40.1
Note that the actual version number might be different, depending on your
configuration.
To Next Page
Loading...
