11.4 Motor Parameters Auto-Tuning
For SVC control and applications with higher requirement to control accuracy in
V/f control, motor parameter auto-tuning is necessary. Two modes of auto-tuning
are available, static auto-tuning and rotational auto-tuning. The former mode is
mainly used for V/f control and the latter is used mainly for SVC control. For de-
tails, see chapter "Motor parameter auto-tuning" on page 212 or chapter "Auto-
tuning of Motor Parameters" on page 230.
Bosch Rexroth AG
Quick Start
EFC x610 Series
96/389
DOK-RCON03-EFC-X610***-IT05-EN-P
To Next Page
Loading...
Need help?
General
