REXROTH EFC 3610 Series - Stop Command Via Panel <Stop> Button

Stop command via panel <Stop> button
After the run command source configuration, set U0.01 'Stop button control' to
define the function of <Stop> button on the operating panel.
Code Name Setting range Default Min. Attri.
U0.01 Stop button control
0: Active only for operating panel control
1: Active for all control methods
1 – Run
EFC x610 Series Bosch Rexroth AG
Functions and Parameters
DOK-RCON03-EFC-X610***-IT05-EN-P
151/389