1.2 Explanation of Signal Words and the Safety Alert Symbol
The Safety Instructions in the available application documentation contain spe-
cific signal words (DANGER, WARNING, CAUTION or NOTICE) and, where re-
quired, a safety alert symbol (in accordance with ANSI Z535.6-2011).
The signal word is meant to draw the reader's attention to the safety instruction
and identifies the hazard severity.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words DANGER, WARNING and CAUTION, is used to alert the reader
to personal injury hazards.
In case of non-compliance with this safety instruction, death or serious injury
will occur.
In case of non-compliance with this safety instruction, death or serious injury
could occur.
In case of non-compliance with this safety instruction, minor or moderate injury
could occur.
In case of non-compliance with this safety instruction, property damage could
occur.
EFC x610 Series
Bosch Rexroth AG
Safety Instructions for Electric Drives and Controls
DOK-RCON03-EFC-X610***-IT05-EN-P
3/389
To Next Page
Loading...
Need help?
General
