REXROTH EFC 3610 Series User Manual

9 Electromagnetic Compatibility (EMC)
9.1 EMC Requirements
9.1.1 General Information
The electromagnetic compatibility (EMC) or electromagnetic interference (EMI)
includes the following requirements:
● Sufficient noise immunity of an electric installation or an electric device
against external electric, magnetic or electromagnetic interference via lines or
through air.
● Sufficiently low noise emission of electric, magnetic or electromagnetic noise
of an electric installation or an electric device to other surrounding devices
via lines or through air.
9.1.2 Noise Immunity in the Drive System
Basic structure for noise immunity
The figure below illustrates the interference for definition of noise immunity re-
quirements in the drive system.
Fig. 9-1: Noise immunity in the drive system
EFC x610 Series Bosch Rexroth AG
Electromagnetic Compatibility (EMC)
DOK-RCON03-EFC-X610***-IT05-EN-P
63/389

REXROTH EFC 3610 Series Specifications

General

Brand	REXROTH
Model	EFC 3610 Series
Category	DC Drives
Language	English