REXROTH EFC 3610 Series User Manual

Code Name Setting range Default Min. Attri.
C0.50 Fan control
0: Automatically controlled
1: Always on
0 – Run
C0.51 Fan total running time 0...65,535 h 0 1 Read
C0.52 Fan maintenance time
0...65,535 h
(0: Inactive)
0 1 Stop
C0.53 Fan total running time reset
0: Inactive
1: Active
Reset to '0' after action is
executed
0 – Run
①
: this parameter is only available with models of 5K50 and above.
②
: this parameters are only available with models of 22K0 and below.
③
: percentage of frequency converter rated current.
Setting range of C0.25:
0: Both disabled
1: Stall overvoltage protection enabled, resistor braking disabled
2: Stall overvoltage protection disabled, resistor braking enabled
3: Stall overvoltage protection enabled, resistor braking enabled
Setting range of C0.28:
0: Both input and output phase loss protection active
1: Only input phase loss protection active
2: Only output phase loss protection active
3: Both input and output phase loss protection inactive
Bosch Rexroth AG
Appendix
EFC x610 Series
334/389
DOK-RCON03-EFC-X610***-IT05-EN-P

REXROTH EFC 3610 Series Specifications

General

Brand	REXROTH
Model	EFC 3610 Series
Category	DC Drives
Language	English