Change
type
Code Name Change description
Modified
C0.40
Power loss ride-through mode
Added "3: Regain kinetic energy, decel-
erate to stop" to setting range
C1.72 Motor thermal sensor type Added "3: PT1000" to setting range
H8.15 Input curve 0 minimum
Changed setting range to: "-120.0 %...
[H8.17]"
Changed default value to: "0.0"
H8.16 Input curve 0 minimum frequency
Changed setting range to: "-[E0.09]...
[E0.09] Hz"
H8.17 Input curve 0 maximum
Changed setting range to: "[H8.15]...
120.0 %"
H8.18 Input curve 0 maximum frequency
Changed setting range to: "-[E0.09]...
[E0.09] Hz"
Changed default value to: "50.0"
H8.87 I/O card output channel diagnosis
Changed parameter name to: "I/O card
output channel diagnosis"
Changed setting range to:
0: Inactive
1: EAO diagnosis
2: EDO diagnosis
3: ERO diagnosis
4: All output diagnosis
H9.02 Extended relay 3 output selection Changed attribute to: "Stop"
H9.03 Extended relay 4 output selection Changed attribute to: "Stop"
H9.97 Relay card output channel diagnosis
Changed parameter name to: "Relay
card output channel diagnosis"
Changed setting range to:
0: Inactive
1: Relay1 diagnosis
2: Relay2 diagnosis
3: Relay3 diagnosis
4: Relay4 diagnosis
5: All output diagnosis
U1.00 Run monitoring display
Added "14: Energy saving counter
kWh" and "15: Energy saving counter
MWh" to setting range
U1.10 Stop monitoring display
Added "14: Energy saving counter
kWh" and "15: Energy saving counter
MWh" to setting range
EFC x610 Series Bosch Rexroth AG
Appendix
DOK-RCON03-EFC-X610***-IT05-EN-P
373/389
To Next Page
Loading...
Need help?
General
