5.System Maintenance
223
How to Set the Machine to Download Firmware Later (RESERVE)
Enter the [Firmware Update] menu in the SP mode and update the package firmware.
The [Firmware Update] button will appear even when a machine is connected to @Remote with a device
which does not have an embedded @Remote communicating function. If an error code is displayed, refer to
Error Screens During Updating.
1. Enter the SP mode.
2. Press [Firmware Update].
3. Press [Reserve].
4. Press [Reservation setting].
5. Enter the dates and times of next visit and start of receiving data.
”Next time to visit this customer”: The package firmware will be automatically downloaded by this time/date.
To Next Page
Loading...
Need help?
General
