EasyManua.ls Logo

Ricoh M0A0 - Page 300

Ricoh M0A0
776 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.Troubleshooting
288
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC866-00
B
SD card authentication error
When a correct license for digital authentication is not found in an SD card application.
The SD card contains the wrong program data.
Store the correct program data on the SD card.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC867-00 to
02
D
SD card removal detection
When an application SD card is removed from the slot while the application is being
activated.
An application SD card has been removed from the slot (from the mount point /mnt/sd*).
SC867-00: /mnt/sd0
SC867-01: /mnt/sd1
SC867-02: /mnt/sd2
Turn the main power switch off and on.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC868-00
D
SD card access error
The SD controller returned an error during operation.
(An error occurred at the mount point of /mnt/sd0)
SD card is defective
SD controller is defective
Reformat the SD card (using the "SD Formatter" made by Panasonic).*
Check the SD card insertion status.
Replace the SD card.
Replace the controller board.
* Do not format the SD card supplied with the main machine or sold as an option. You may only format SD cards used
for Firmware Update by the Customer Engineer.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC868-
01
D
SD card access error
The SD controller returned an error during operation.
(An error occurred at the mount point of /mnt/sd1)
SD card is defective
SD controller is defective
SD card used for starting an application
Turn the main power off and check the SD card insertion status.
If no problem is found, insert the SD card and turn the main power on.
If an error occurs, replace the SD card.

Table of Contents

Related product manuals