3.Appendices: SP Mode Tables
133
ï‚· If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had
been reached when the job was cancelled.
ï‚· Even if several files are combined for sending, the transmission counts as one job.
These SPs count the number of PC Fax transmission jobs. A job is counted from when
it is registered for sending, not when it is sent.
[0 to 99999999/ 0 / 1/step]
Note: At the present time, these counters perform identical counts.
ï‚· This counts fax jobs started from a PC using a PC fax application, and sending the data out to the destination from
the PC through the copier.
These SPs count the pages scanned by WS.
[0 to 99999999/ 0 / 1/step]
These SPs count the scanned pages in a media by the scanner application.
[0 to 99999999/ 0 / 1/step]
These SPs count the pages scanned by each application that uses the scanner to
scan images.
[0 to 99999999/ 0 / 1/step]
ï‚· SP 8 191 to 8 196 count the number of scanned sides of pages, not the number of physical pages.
ï‚· These counters do not count reading user stamp data, or reading color charts to adjust color.
ï‚· Previews done with a scanner driver are not counted.
ï‚· A count is done only after all images of a job have been scanned.
ï‚· Scans made in SP mode are not counted.
Examples
ï‚· If both sides of 3 A4 sheets are copied and stored to the document server using the Store File button in the Copy