3.Appendices: SP Mode Tables
134
mode window, the C: count is 6 and the L: count is 6.
ï‚· If both sides of 3 A4 sheets are copied but not stored, the C: count is 6.
ï‚· If you enter document server mode then scan 6 pages, the L: count is 6.
[0 to 99999999/ 0 / 1/step]
These SPs count the total number of large pages input with the scanner for scan and copy jobs. Large size
paper scanned for fax transmission is not counted.
Note: These counters are displayed in the SMC Report, and in the User Tools display.
F: LSize Scan PGS
A3/DLT, Larger
[0 to 99999999/ 0 / 1/step]
These SPs count the total number of large pages input with the scanner for fax transmission.
Note: These counters are displayed in the SMC Report, and in the User Tools display.
[0 to 99999999/ 0 / 1/step]
These SPs count the total number of large pages input with the scanner for scan jobs only. Large size paper
scanned for fax transmission is not counted.
Note: These counters are displayed in the SMC Report, and in the User Tools display.
These SPs count the number of pages scanned into the document server
[0 to 99999999/ 0 / 1/step]
The L: counter counts the number of pages stored from within the document server
mode screen at the operation panel, and with the Store File button from within the
Copy mode screen.
ï‚· Reading user stamp data is not counted.
ï‚· If a job is cancelled, the pages output as far as the cancellation are counted.
ï‚· If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.
ï‚· If pages are copied but not stored on the document server, these counters do not change.
ï‚· If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the L: count is 6.
ï‚· If you enter document server mode then scan 6 pages, the L: count is 6.
[0 to 99999999/ 0 / 1/step]
These SPs count the number of pages fed through the ADF for front and back side scanning.
Number of front sides fed for scanning: